CRL Kett Panel Saw Kit by CR Laurence

Cuts Smoothly and Accurately, Milled Edges are Finished With No Sanding Needed Start the Cut Where You Want and Cut With Ease Cuts Mild Steel, 16 Gauge Aluminum, Fiberglass, Plastic, and Plastic Laminates Get straight, smooth and accurate cuts every time with the CRL Kett Panel Saw. It cuts mild steel up to 16 gauge, and zips through aluminum, fiberglass, plastic and plastic laminates with a minimum of effort. It also cuts through any desired depth of soft, rigid sheets and panels from 0 to a full 5/8 inch (0 to a full 15.9 millimeter) depth. The blades quickly cut mill edges that don't need sanding or finishing. There's no warping or buckling on either side of the cut. Standard equipment includes:Four Assorted BladesWrenches Necessary to Make AdjustmentsHeavy-Duty, Industrial, Universal Kett Motor Operates on 115V AC/DC (230V winding available). Motor and Saw Unit Ball Bearing Equipped for Smooth OperationAdditional Replacement Blades and Accessories are Available for This Tool.2 Inch (50.8 millimeter) Diameter Blades in 22, 30, 44, 60 and 80 Tooth Specifications Give 3/8 Inch (9.5 millimeter) Depth of Cut; 2-1/2 Inch (63.5 millimeter) Diameter blades in 44, 60, 80 and 100 Tooth Specifications Give 5/8 Inch (15.9 millimeter) Depth of Cut. All packaged in a kit and also sold individually.